Standard parallel-bus structures are reaching their performance limits. The only way to increase system bandwidth is to switch to a serial-bus structure. Although serial structures promise enhanced ...

EDN Access-04.24.97 Serial backplanes supplant parallel buses in fast systems - EDN Design Design How-To ...

The first parallel-to-serial I2C interface lets designers add I2C interfaces to any digital system. The PCA9564 controller provides a 400-kHz I2C serial bus and operates from 2.5 to 3.3 V. The chip is ...

Improving density in circuit design is an ongoing challenge. One solution is to reconsider circuit layouts from the perspective of bandwidth optimization.

A shared channel that transmits data one bit after the other over a single wire or fiber; for example, Ethernet uses a serial bus architecture. The I/O bus from the CPU to the peripherals is a ...

This is just a general question. I know, obviously, that there are RS-232 "serial ports" and IEEE 1284/Centronix ports "parallel ports," and that these are "digital" connections. Then you have things ...

The bus in a PC is the common hardware interface between the CPU and peripheral devices. Parallel buses with multiple lines (wires) were superseded by serial versions, which use one line for data.

For more than 20 years, the parallel bus interface has been the mainstream storage interconnect for most storage systems. But increasing bandwidth and flexibility demands have exposed inefficiencies ...